FUJI 2MGTHA058501 COVER
Our company has been in operation for 11 years and will definitely be your best choice with guaranteed quality and fast delivery
Product Introduction – FUJI 2MGTHA058501 COVER
Part Number: 2MGTHA058501
Product Name: COVER
Category: Mechanical Protection Component / Cover Plate
Application: FUJI NXT Series – Likely H24/H24G/H24S Working Head or Module
Product Overview
The FUJI 2MGTHA058501 COVER is a protective cover component used in FUJI NXT series SMT equipment, likely associated with H24/H24G/H24S working heads or internal modules. It serves as a mechanical shield or enclosure for internal parts, helping to protect critical components such as motors, bearings, encoders, or wiring assemblies from dust, debris, and mechanical interference.
Key Features
Protective Function
Shields sensitive internal head or unit components from environmental exposure or accidental contact.
Precise Fitment
Designed with exact dimensions to mount securely to specific FUJI modules (e.g., head housing, axis assembly).
Durable Material
Typically constructed from aluminum alloy, machined resin, or anodized sheet metal for strength and ESD safety.
Easy Installation and Replacement
Can be installed or removed during routine maintenance without specialized tools.
Common Applications
May be used to cover:
Q-axis motor housing
Head encoder compartment
Top or side panel of the H24/H24G/H24S working head
Internal control board or drive module area
Related Components
| Part Number | Description |
| 2MGTHA080003 | Working Head Motor |
| 2MGTHA091900 | Q-axis Bearing |
| AA6GM00 | Encoder for Head Rotation |
| H65860 / H65900 | H24/H24G Working Head Assemblies |
| Mounting Screws | Fasteners used to fix the cover in place |
Specifications (Typical)
Material: Lightweight metal or industrial-grade polymer
Finish: Anodized or painted (for corrosion and ESD protection)
Mounting: Screw-fixed to matching head or unit surface
Weight: Lightweight, not affecting head balance
Color: Usually metallic silver, black, or gray
Ordering & Handling Notes
Confirm the exact mounting location using FUJI’s exploded diagram or service manual.
Ensure part number 2MGTHA058501 matches your machine’s head variant or subassembly.
Replace during physical damage, wear, or scheduled overhaul.
Related Accessories – FUJI 2MGTHA058501 COVER
| Accessory Name | Description |
| Working Head Motor | Typically protected or partially enclosed by this cover (e.g. 2MGTHA080003) |
| Q-axis Bearing | Internal rotating unit often located beneath or near the cover |
| Encoder Unit | Covered by or mounted near the protective panel |
| Cover Mounting Screws / Bolts | Fasteners used to secure the cover in place |
| Working Head Frame / Housing | Structural body where the cover is attached |
| Connector Harness / Cable Guide | Routed under or through the cover, protected by it |
| Cooling Plate or Shield | May be installed adjacent to the cover area to aid heat dissipation |
Related Part Numbers – FUJI 2MGTHA058501 COVER
| Part Number | Description | Notes |
| 2MGTHA058501 | COVER (this part) | Protective cover panel |
| 2MGTHA080003 | Working Head Motor | Likely housed beneath the cover |
| 2MGTHA091900 | Q-axis Bearing | Covered/associated internal component |
| AA6GM00 | Encoder (rotational feedback) | May be partially enclosed |
| H65860 | H24 Working Head Assembly | Head assembly using this cover |
| H65900 | H24G Working Head Assembly | Compatible head model |
| H66010 | H24S Working Head Assembly | Higher-speed variant |
| AA6PT00 | Grease (used in serviced areas beneath the cover) | Maintenance use |
| A50375 | Bracket or Subframe Plate | Often mounted near the cover |
Notes:
2MGTHA058501 is typically not a functional or electronic component but plays an important protective and structural role.
When replacing this part, always inspect nearby motor wiring, screw threads, and cover alignment tabs.
If damaged, a missing or loose cover may lead to dust intrusion, cable damage, or cooling inefficiency.
FAQ Guide – FUJI 2MGTHA058501 COVER
1. What is the function of the FUJI 2MGTHA058501 COVER?
Answer:
The 2MGTHA058501 COVER is a protective panel used in FUJI NXT series equipment, typically within H24, H24G, or H24S working heads. Its primary function is to shield internal components—such as motors, encoders, wiring, and bearings—from dust, debris, physical damage, and static discharge.
2. Where is this cover located?
Answer:
This cover is typically mounted on or near the side or top of the working head or within a sub-assembly of the head, depending on the axis or unit it protects. It may be associated with either the motor compartment, Q-axis assembly, or encoder housing.
3. Which FUJI equipment is it compatible with?
Answer:
It is primarily used in:
H24 Working Head
H24G Working Head
H24S High-Speed Working Head
These heads are installed on FUJI NXT II / III machines.
4. What happens if this cover is missing or damaged?
Answer:
Increased risk of dust intrusion and component wear
Possible wiring exposure leading to electrical shorts
Reduced cooling efficiency and mechanical protection
May trigger inspection or safety alerts depending on the machine
5. Can this cover be reused or does it require replacement?
Answer:
If undamaged, it can be reused during disassembly or maintenance.
Replace the cover if it is cracked, bent, missing screws, or misaligned.
6. What components are related to this cover?
| Related Part Number | Description |
| 2MGTHA080003 | Motor – possibly enclosed by this cover |
| 2MGTHA091900 | Q-axis bearing (nearby component) |
| AA6GM00 | Encoder unit |
| H65860 / H65900 | Working head assemblies (H24/G/S) |
| Mounting screws | Fasteners that hold the cover in place |
7. What material is the cover made of?
Answer:
Generally constructed from lightweight aluminum alloy or high-grade industrial plastic
Designed for durability, light weight, and ESD safety
8. How is it installed or removed?
Answer:
Fixed using standard screws (machine-threaded or self-tapping, depending on model)
Should be aligned carefully with dowel pins or tabs
Installation should be done with ESD-safe tools and gloves
9. Is the 2MGTHA058501 COVER sold individually?
Answer:
Yes, it is typically sold as a standalone mechanical part
It may also be included in head casing kits or maintenance rebuild kits
10. Where can I purchase or get support for this part?
Answer:
From authorized FUJI SMT parts distributors
Confirm the machine model and head type before ordering
Support is available through FUJI-certified service centers
pcb magazine loader,pcb loader,smt loader,pcb loader machine,bare board loader,pcb loader unloader,pcb magazine unloader,smt conveyor,pcb inspection conveyor,pcb conveyor,pcb magazine,pcb magazine rack,smt magazine rack,magazine pcb,smt magazine,smd magazine,pcb storage racks,pcb container,ESD storage racks,esd pcb racks,smd counter machine,reel counter machine,component counting machine,smd component counter ,smd parts counter ,nozzle cleaning machine
We can do for you:
1. We provide fulL SMT solution for you
2. We provide core technology with our equipments
3. We provide the most professional tech service
4. We have wealthy experience on SMT factory setup
5. We can solve any question about SMT
Contact:
CNSMT Electronics Equipment Co,.LTD
Email: info@smtlinemachine.com
www.smtlinemachine.com
Mb/whatsapp/wechat:+8613537875415
SKYPE:smtdwx
Product Tags:
|
|
Durable FUJI 2MGTHA058501 Cover SMT Spare Parts for Reliable SMT Production Lines Images
|
